How to change the integrated ceiling light bulb integrated ceiling how to clean

Ceiling is a very important part of modern home improvement. For modeling and personalized ceilings, toilets and kitchens are more suitable for installing integrated ceilings. However, many people do not understand how to change the light bulbs for integrated ceilings . It is actually very simple. Here's how to change the light bulb and how to clean it.

1. How to change the bulb for the integrated ceiling

How to change the light bulb integrated ceiling? Integrated ceiling change light bulb is relatively simple, but there are many skills, the wrong way is not to change, mainly because the lamp is a series of integrated ceiling, each structure has connectivity It is mainly divided into two parts: the mask and the top seat, so if you want to remove the cover, you need to use a suction cup, preferably a special one, to suck down the mask.

Then you can see the internal lighting, you can start to replace the light bulb, its light is buckled by the buckle, it is still relatively easy to remove it, as long as the next to the light to remove a pinch, and then you can put the light bulb It is simply removed, the new lamp is pressed up, then the buckle plate is installed, and the mask is finally installed to complete the replacement.

How to change the light bulb integrated ceiling ? The method of replacing the light bulb is simple, but still pay attention to some of the first to know the combination of the ceiling lamp and the plate, the installation of the general light is stuck above the keel, adsorption mask and remove the chandeliers When you need to use vertical force, but also use your hands to help, to avoid the force is too much lead to the lamp off, the line breaks and so on.

So integrated ceiling in the replacement bulb is to gently take light, do not use too much force, or the lampshade and the buckle plate will also be deformed, the original installation direction should also pay attention to avoid the installation of anti-color, the replacement of the bulb to choose the same model OK, it is better to use well-known brands and lamps, with higher thermal efficiency, more safety, and long service life, without frequent change.

2. How to clean and maintain the integrated ceiling

The kitchen and bathroom gussets are mostly roller coated or brushed. This material is relatively easy to clean, the kitchen can not avoid the existence of oil, clean up when you need to add a small amount of detergent, and then select the water absorption Better soft cloth to wash with water, the edge of the gusset plate should be lighter when scrubbed, and in the middle can be forced.

If it is the integrated ceiling finish of the foil material, it is necessary to avoid the use of hard cloths and cleansing balls, which are tools with strong friction when cleaning, and it is very easy to leave small wires on the panel when it is scrubbed. Buckle plate.

If the ceiling plate is of heavy material, there is a possibility that iron is present. If a large amount of water is used for scrubbing, it is very easy to rust. After scrubbing, wipe it with a dry cloth and open the window to allow ventilation. it.

Editor's Note: The above is about how to integrate the ceiling light bulb and how to clean the integrated ceiling. The integrated ceiling is very suitable for the bathroom, kitchen, these areas are very good, the wire, water pipes and the like are hidden, it is also very Simple, usually do its maintenance and cleaning can increase its life.